Janome DigitizerPro Instruction Book page 158

Inserting stitches
Use Edit > Stitch Mode to insert stitches in an
object.
You can insert stitches in an object to fill gaps.
Inserted stitches are considered part of the object
(rather than independent objects). Where
possible, edit the object details
individual stitches. For example, to increase stitch
density, reduce spacing rather than insert stitches.
To insert stitches
1 In EasyEdit, click the Stitch Mode icon.
2 Zoom into the area you want to edit.
3 Select a needlepoint.
The stitch changes color and the needle position
marker moves to the selected stitch.
4 Move the mouse pointer where you want to insert the
new stitch, and right-click.
5 Move the mouse to where you want to insert the next
stitch, and right-click.
rather than
6 Continue right-clicking as required.
Moving stitches
In EasyEdit, you can move individual or groups of
selected stitches.
To move stitches
1 In EasyEdit, click the Stitch Mode icon.
2 Select stitches and drag them to a new position.
3 Press Enter.
Right-click
Splitting stitch blocks
In both EasyEdit and EasyDesign, you can split
large stitch blocks into fragments in order to
reposition, transform or resize them in the design,
or delete them altogether.
JANOME Embroidery Software Instruction Book
Use Edit > Stitch Mode to select individual
stitches for moving.
The stitch shadow outline shows the new position.
Drag stitch to new
position
Shadow outline
Selected stitch
Use Edit > Stitch Mode to select individual stitches
for deletion.
Use Edit > Split Block to split the design at a
selected needlepoint.
Chapter 20 Stitch Editing
Right-click
156