Janome DigitizerPro Instruction Book page 132

2 Click the Reshape icon.
Control points appear together with a stitch angle line.
3 Click and drag the line as required.
Note Notice that the mouse pointer changes to a 'stitch
angle mouse pointer'.
Esc
4 Press to finish.
Try this! To minimize gaps in your embroidery, place
the entry and exit points opposite each other on the
outside boundary. Then define the stitch angle so it is
perpendicular to the line between the entry and exit
points.
Editing stitch angles in Reshape mode
Click Edit > Reshape to display control points and
stitch angle lines in selected objects.
You can adjust the stitch angles
Turning Angle Fill objects interactively using the
Reshape tool. You can also add and delete stitch
angles while in Reshape mode.
To edit stitch angles in Reshape mode
1 Select the lettering object.
2 Click the Reshape icon and click the letter outline.
3 Click-and-drag stitch angle points to their required
4 Select and delete stitch angles by pressing the
5 Holding down the
6 Press
Changing entry and exit points
of Lettering and
You can change the stitch entry and exit points of
individual objects. Do this to place the exit point
next to adjoining objects for smaller connecting
stitches, or to reduce the number of travel runs.
JANOME Embroidery Software Instruction Book
Chapter 17 Reshaping and Editing Objects
positions.
The stitch angles change accordingly.
Note Notice that the mouse pointer changes to a 'stitch
angle mouse pointer'.
button.
Ctrl
key, click the outline wherever
you want to place a stitch angle line.
Esc
to finish.
Use Edit > Reshape to adjust the entry and exit
points of selected objects.
130
Delete