Janome DigitizerPro Instruction Book page 145

Note Changes apply only to future uses of the
template. Existing designs based on the template
are not affected.
To modify design templates
1 Select File > Open.
The Open dialog opens.
2 Navigate to the JANOME Embroidery
Software\Template folder, then select Templates
(JMT) from the Files of type dropdown list.
The available template files display.
3 Select the template you want to modify and click Open.
4 Modify object details, styles and other settings as
required.
5 Select File > Save As.
The Save As dialog opens.
6 From the Save as type dropdown list, select
Templates (JMT), and click Save.
Try this! To create a new template based on the
modified one, type a new file name and click Save.
7 Click Yes to confirm.
The modified template is ready for use.
Deleting design templates
Delete templates in the same way as you would
any other Windows file, using Windows Explorer.
Templates are located in the JANOME Embroidery
Software\Template folder.
JANOME Embroidery Software Instruction Book
Chapter 18 Object Details, Fabrics and Templates
143