Janome DigitizerPro Instruction Book page 107

conversion. Even if your
stitch when inserted into the software, it will need
to be image-processed before conversion. The
software will not let you apply automatic digitizing
techniques without preliminary image-processing.
See Image preparation techniques
To create embroidery designs with
Click-to-Design Advanced
1 Scan or load an image. See
EasyDesign for details.
2 Select the image and process it. See
for Automatic Digitizing
3 Select the image and click the
Click-to-Design Advanced icon.
The Click-to-Design dialog opens. Provided the
image has been correctly image-processed, all
available colors appear by default in the Fill Colors
column. Image information is given, including width and
height values as well as the number of image colors.
artwork looks ready to
for details.
Scanning artwork into
Preparing Images
for details.
Adjust stitch types and
details
Click to process image
if activated
Click-and-drag colors
between fields
Choose colors to
omit
JANOME Embroidery Software Instruction Book
Chapter 14 Automatic Digitizing
Note If the image has not been correctly
image-processed, no colors appear and the
Preparation
button is activated. Click to process the
image. See Image preparation techniques
4 Click-and-drag any colors you want to omit from
automatic stitch processing into the Omit column.
5 Similarly, click-and-drag or leave any colors you want
to be treated as filled areas in the Fill column.
6 Click-and-drag any colors you want to be treated as
'details' – i.e. any outlines, borders or small areas you
want to stitch out last – into the Details column.
7 Select a stitching style for fills from the list:
Option Purpose
Auto Select The software decides on a suitable
stitch type.
Weave Suited for most areas.
Satin Suited for use in smaller areas.
Note Do not use Satin fill for areas where the stitch
length exceeds 7 mm.
Image
for details.
Background color
omitted
Green colors
omitted
105