Towing; Flat-Bed Equipment; Tie Down Bracket Hole Locations; Towing Hook Installation - Honda S2000 Service Manual

General lnformation
Towing
lf the vehicle needs to be towed, call a professional
towing service. Never tow the vehicle behind another
vehicle with just a rope or chain. lt is very dangerous.
Emergency Towing
Flat-bed Equipment- The operator loads the vehicle
on the back of a truck. This is the onlv recommended
way of transporting the S2000.
Tie Down Bracket Hole Locations:
Front:
FRONT TIE DOWN
BRACKET HOLE
Rear;
''#:
,,
,,
-.-:..
,i
i
1-14
c
. This vehicle can only be transported on a flat-bed.
. Trying to lift or tow the vehicle by the bumpers will
cause serious damage. The bumpers are not
designed to suppon the vehicle's weight.
Towing Hook Installation:
To avoid damage to the car, use the towing hook for
straight, flat ground towing only. Do not tow at an angle.
The towing hook should not be used to tow the vehicle
onto a flat bed. Do not use it as a tie down.
. Remove the cover from the rear or front bumper.
.Install the rear or front towing hook securely into the
bolt hole behind the bumper through the opening.
The towing hook is located in the tool kit in the trunk.
Rear:
REAR BUMPER
OPENING golr
xoLe
(behind openingl
TOWING HOOK
OPENING
COVER
BOLT HOLE
(behind opening)