Alternator Replacement - Honda 2004 Odyssey Service Manual

Alternator Replacement

1. Make sure you have the anti-theft code for the radio
and the navigation system, then write down the
frequencies for the radio's preset buttons.
2. Disconnect the negative cable from the battery first,
then disconnect the positive cable.
3. Remove the alternator-compressor belt (see page
4-26).
4. Disconnect the alternator 4P connector (A) and BLK
wire (B) from the alternator.
A
8 x 1.25 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
5. Remove the mounting bolt (A) and alternator
bracket mounting bolt (B), then remove the harness
clamp (C) from the alternator bracket.
A
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
6. Install in the reverse order of removal.
B
7. Enter the anti-theft code for the radio and the
navigation system, then enter the customer's radio
station presets.
8. Perform the powertrain control module (PCM) idle
learn procedure (see page 11-202), and the power
window control unit reset procedure (2003-2004
models) (see page 22-200).
9. Set the clock.
6 x 1.0 mm
C
12 N·m (1.2 kgf·m,
8.7 lbf·ft)
B
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
4-27