Table of Contents
Advertisement
show spantree lpcapablepartner
show spantree lpcapablepartner
Use this command to the Loop Protect capability of a link partner for one or more ports.
Syntax
show spantree lpcapablepartner [port port-string]
Parameters
port‐string
Defaults
If no port‐string is specified, Loop Protect capability for link partners is displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display the Loop Protect partner capability for
B3(rw)->show spantree lpcapablepartner port ge.1.1
Link partner of port ge.1.1 is not LoopProtect-capable
clear spantree lpcapablepartner
Use this command to reset the Loop Protect capability of port link partners to the default state of
false.
Syntax
clear spantree lpcapablepartner port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the Loop Protect partner capability for
B3(rw)->clear spantree lpcapablepartner ge.1.1
7-44 Spanning Tree Configuration
(Optional) Specifies port(s) for which to display Loop Protect capability
for its link partner.
Specifies port(s) for which to clear their link partners' Loop Protect
capability (reset to false).
.1.1:
ge
.1.1:
ge
Advertisement
Table of Contents
