Configuring The Monitor Agent Cluster Resource To Load And Unload The Monitor - Novell GROUPWISE 7 - INTEROPERABILITY GUIDE Manual

2 From the software distribution directory you created in
New GroupWise System in a Linux Cluster," on page
program and select Configure GroupWise for Clustering.
3 Install the Monitor Agent software on the cluster node as usual, but do not use the Configure
option.
For the Monitor Agent, you do not need to import clustering data on subsequent nodes as you
do for the other GroupWise agents.
4 Repeat
After you install the Monitor Agent on each node in its failover list, the cluster node is ready
for the Monitor Agent to fail over to it.
5 Continue with
Configuring the Monitor Agent Web Console for SSL
If you plan to secure the Monitor Web console using SSL, you need to provide an SSL certificate
file. You can place the file on the Monitor Agent partition, rather than each node.
1 Create a directory on the Monitor Agent partition where you want to store the certificate file.
2 In the grpwise-ma script, use the
you created in
Continue with
Testing the Monitor Agent Installation on Each Node
1 Test the Monitor by starting it as a daemon, as described in
as a Daemon" in
/etc/initd/grpwise-ma start
/etc/initd/grpwise-ma status
2 Then stop the Monitor Agent.
/etc/initd/grpwise-ma stop
/etc/initd/grpwise-ma status
3 Return to
each node in the Monitor Agent failover list
When you have installed the Monitor Agent on all of the nodes in the Monitor Agent fail over list,
continue with
Agent.
212 GroupWise 7 Interoperability Guide
Step 1 through Step 3 for each cluster node in the Monitor Agent failover list.
Configuring the Monitor Agent Web Console for
Step 1.
Testing the Monitor Agent Installation on Each
"Installing GroupWise
"Running the Monitor Installation Program on the Preferred Node" on page 210

Configuring the Monitor Agent Cluster Resource to Load and Unload the Monitor

Step 6
143, start the GroupWise Installation
--httpcertfile switch to specify the full path to the directory
Node.
"Starting the Linux Monitor Agent
Monitor" in the GroupWise 7 Installation
(Monitor Agent Clustering Worksheet item
in Section 14.1, "Setting Up a
SSL.
Guide.
for
4)