Configure User Group For C1100 - Nortel C251 Configuration Manual

Conti vity 251 ABOT D eployment
4: Configure public default gateway (must obtain gateway address from ISP)
Default Public Route Menu
0) Gateway IP Address =
Cost = 10
A) Add New Gateway
R) Return to the Main Menu
5: Configure DHCP server for priv ate LAN as defined
Return to main Menu, and select "L" to go to Command Line Interface. Enables privileged
commands, then type the following commands to Configure and enable DHCP server
ranging as 192.168.3.0/24.:
Config t
ip dhcp server pool network 192.168.3.0 mask 255.255.255.0
included-address 192.168.3.3 192.168.3.30
exit
service dhcp enable
exit
6: Renew PC IP address
On the PC, open a DOS command window, then issue the following commands to release and
renew the IP address:
Ipconfig /release
Ipconfig /renew
To open a DOS command window, go to Start->Run, then type the name of "cmd".
In this example, the PC S3 has a new IP address of 192.168.3.9.
Open WEB GUI to connect to C1100 using

3.6.2 Configure User Group for C1100

Go to Profile->User Group
1: add User Group "c251client"
2: add IP-Pool "c251client"
Version 1.0
24.1.48.1
h ttp://192.168.3.2
U
April 26, 2004
U