Connecting To The Bcm450 Through Element Manager; Configuring User Access; Prerequisites - Nortel Business Communications Manager 450 Installation Manual

7

Connecting to the BCM450 through Element Manager

After you install Element Manager on your PC, use it to connect to the
BCM450 system.

Prerequisites

• Element Manager must be installed on your PC.
• Your BCM must be powered on and connected to the network, or
connected directly to your PC through the OAM port or serial port.
Procedure steps
Step
1
2
3
4

Configuring user access

After you have installed Element Manager and connected to the BCM450
system, you can create and configure user accounts for Element Manager.
Prerequisites
• Element Manager must be installed on your PC.
Copyright © 2006-2009 Nortel Networks
After BCM Element Manager finishes downloading, double-click the
application and follow the installation instructions.
Action
Open BCM Element Manager.
From the Network menu, select New Network Element, and then select
Business Communications Manager.
Enter the BCM system IP address, the user name, and password (see the
following for defaults):
IP address: 192.168.2.2
Username: nnadmin
Password: PlsChgMe!
Click OK.
You are now connected to the BCM system. For more information about
using BCM Element Manager, see the online Help within BCM Element
Manager.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
Element Manager installation 93
--End--
--End--