Specifications; Adjustments; Steering Stop Bolt Adjustment; Service And Repairs - Toro Groundsmaster 220-D Service Manual

Specifications

Item
Wheel lug nut torque (font and rear)
Rear wheel toe-in
Tire pressure (front and rear)
Axle lubricant
Bi–directional clutch lubricant

Adjustments

Steering Stop Bolt Adjustment

The rear axle steering stop bolts help prevent over–trav-
el of the steering cylinder in case of impacts on rear
wheels. When the steering cylinder is fully extended, a
gap of 1/16" (1.6 mm) should exist between left side bev-
el gear case casting and stop bolt (Fig. 1). When the
steering cylinder is fully retracted, a gap of 1/16" (1.6
mm) should exist between right side bevel gear case
casting and stop bolt.

Service and Repairs

See Operators Manual for Maintenance intervals and instructions.
4WD Rear Axle
(Groundsmaster 228–D with Dae Dong axle)
1. Steering stop bolt
Page 10.1 – 2
Rev. H
Specification
45–55 ft-lbs. (61 to 75 Nm)
0.000 to 0.125 in. (0.0 to 3.0 mm)
20 psi (138 kPa)
SAE GL-5 80W90 gear lube
Mobil 424 hydraulic fluid
1
Figure 1
2. Bevel gear case (LH)
Groundsmaster 228–D
2