Removing And Installing Coolant Pump - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
1 - Screw
❑ 8 Nm
2 - Support ring
3 - O-ring
❑ replace
4 - Coolant temperature send‐
er - G62-
❑ removing and installing
⇒ page 162
5 - O-ring
❑ replace
6 - Coolant temperature send‐
er at radiator outlet - G83-
❑ removing and installing
⇒ page 163
7 - Retaining clip
❑ check tightness
2.3

Removing and installing coolant pump

Special tools and workshop equipment required
♦ Catch pan , e.g. -VAS 6208-
♦ Pliers for spring strap clamps
♦ Adapter for cooling system testing device , e.g. -V.A.G 1274/8-
Removing
– Remove noise insulation ⇒ Body; Rep. gr. 66 .
– Drain coolant ⇒ page 148
– Remove air filter housing
156
Rep. gr.19 - Cooling
.
⇒ page 235 .