Skoda Octavia III 2013 Workshop Manual page 160

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
❑ Observe proper seating of gasket
❑ before installing, slightly moisten with coolant
7 - Toothed belt guard
❑ For coolant pump toothed belt
8 - Screw
❑ replace
20 Nm + torque a further 90° (
9 - Toothed belt
❑ Replace when changing coolant pump
❑ For coolant pump drive
❑ removing and installing
10 - Toothed belt pulley
❑ For coolant pump drive
❑ removing and installing
11 - Screw
8 Nm
12 - Screw
❑ order of tightening
7 Nm
13 - Screw cap
❑ for coolant regulator
14 - Gasket
❑ replace
❑ before installing, slightly moisten with coolant
15 - Coolant regulator
❑ For small coolant circuit (cylinder head circuit)
❑ Start of opening approx. 80 ℃
❑ removing and installing
❑ Fitting position ⇒ page 154
16 - Screw
❑ Tightening torque and tightening order
Installation position of thermostat for large coolant circuit
• Must be fitted with the centring pin into guide -arrow- on cool‐
ant pump housing.
154
Rep. gr.19 - Cooling
1
/ 4 turn)
⇒ page 156
⇒ page 159
⇒ page 155
⇒ page 160
⇒ page 158