Skoda Octavia III 2013 Workshop Manual page 202

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
Caution
The fuel tank must be empty for weight reasons when removing
it, if necessary suction the fuel out of the fuel tank
⇒ page 185 .
Removing
Note
Safety precautions when working on the fuel supply system
♦
⇒ page 3 .
Rules of cleanliness when working on the fuel supply system
♦
⇒ page 4 .
– Switch off the ignition and all electrical components and take
out the ignition key.
– Remove rear seat bench with brackets ⇒ Body Work; Rep.
gr. 72 .
– Remove floor covering under the rear seats.
– Unclip cover -1- for closing flange from holder catches
-arrows- using the disassembly wedge - 3409- .
– Unlock and disconnect the connectors -1- from the fuel deliv‐
ery unit.
– Open the fuel tank cap.
– Clean the area around the fuel filler neck.
– Remove rear wheel on the right ⇒ Axles, steering; Rep. gr.
44 .
– Remove the rear right wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
196
Rep. gr.20 - Fuel supply system