Skoda Octavia III 2013 Workshop Manual page 70

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
E - Inspect the installation position of the rotor on the crankshaft:
– Screw nut -E- on until it reaches end of threaded spindle.
– Release both screws -A- from the cylinder block.
– Release knurled screws -B- from the sealing flange.
– Unscrew assembly tool - T10134- from the crankshaft flange,
to do so, unscrew Allan screws from the crankshaft flange.
– Remove sealing lip supporting ring.
– Mount depth gauge - VAS 6082- onto the crankshaft flange.
– Measure distance -a- between crankshaft flange -A- and rotor
-B-.
• Specified value: Dimension -a- = 0.5 mm
– If the specified value is too small, press rotor down
⇒ page 64 .
– When the specified value has been reached, perform the re‐
maining assembly ⇒ page 66
F - Pressing down the rotor:
– Secure assembly tool - T10134- to crankshaft flange, to do so,
tighten the Allan screws -A- until hand-tight.
– Press the assembly tool - T10134- against the sealing flange
by hand.
64
Rep. gr.13 - Crankshaft group
.