Skoda Octavia III 2013 Workshop Manual page 132

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
If the valve collets were removed from the assembly cartridge,
first of all they must be inserted into the insertion device for valve
collets -VAS 5161/32-3- .
• The large diameter of the valve collets points to the top.
– Press the assembly cartridge from the top -VAS 5161/32-2-
onto the insertion device -VAS 5161/32-3- and lift up the valve
collets.
– Insert the valve spring and the valve spring retainer, installa‐
tion position of valve spring
– Screw the guide plate -VAS 5161A/32- back onto the cylinder
head.
– Insert assembly cartridge -VAS 5161/32-2- with sleeve -VAS
5161/32-3- mounted into the guide plate -VAS 5161A/32- .
– Press down the pressure fork -VAS 5161/2- and turn the
knurled screw to the left and to the right while pulling it up‐
wards, by doing so the valve collets are inserted.
– Release the pressure fork -VAS 5161/2- on tightened knurled
screw.
– Repeat the procedure for each valve.
– Install cylinder head ⇒ page 80
126
Rep. gr.15 - Cylinder head, valve gear
⇒ page 116 .
.