Skoda Octavia III 2013 Workshop Manual page 42

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
13 - Pendulum support
❑ removing and installing
14 - Screw
❑ replace
❑ 100 Nm + torque a further 90° (
15 - Screw
❑ replace
❑ 50 Nm + torque a further 90° (
16 - Screw
❑ replace
❑ 60 Nm + torque a further 90° (
17 - Screw
❑ replace
❑ 40 Nm + torque a further 90° (
18 - Gearbox mount
Engine support bracket - tightening torque and tightening order
Note
Replace screws of engine support.
– Tighten screws in steps in the given sequence:
Stage Screws
1. -1 ... 3-
2. -1 ... 3-
3. -1 ... 3-
Removing and installing pendulum support
– Unscrew screw -1-.
– Remove screws -2- and -3- and remove support -4-.
Installation is carried out in the reverse order.
Note
Replace screws of engine support.
– Tighten screws in steps in the given sequence:
Stage Screws Tightening torque/torquing angle
1. -2, 3- 50 Nm
2. -1- 100 Nm
3. -1 ... 3-
90° (torque a further 90° (
36
Rep. gr.10 - Removing and installing engine
⇒ page 36
1
/ 4 turn)
1
/ 4 turn)
1
/ 4 turn)
1
/ 4 turn)
Tightening torque/torquing angle
7 Nm
40 Nm
90° (torque a further 90° (
1
1
/ 4 turn)
/ 4 turn)