Windscreen Wash/Wipe System; Windscreen And Rear Window Wiper System; Removing And Installing The Washer Pump And Washer Fluid Reservoir - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
92 –

Windscreen wash/wipe system

1 Windscreen and rear window wiper
system
⇒ "1.1 Removing and installing the washer pump and washer fluid
reservoir", page 62
⇒ "1.2 Removing and installing the spray nozzles for windscreen
washer system", page 63
⇒ "1.3 Removing and installing the spray nozzle for rear window
washer system", page 64
⇒ "1.4 Repairing washer fluid level pipes", page 65
1.1 Removing and installing the washer
pump and washer fluid reservoir
The function of the windscreen washer system can be checked
with the ⇒ Vehicle diagnostic tester via the final control diagnosis
of the vehicle voltage control unit - J519- .
Removing
Note
Depending on the version, the positions of the individual compo‐
nents and the hose connection can differ slightly from the version
in the illustrations. The removal occurs in the same way.
– Switch off the ignition and all electrical components.
– Remove the front left wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Release plug from the washer fluid pumps for windscreen
-5-, for headlight -2- and from sensor for washer fluid level
-4-.
– Expose wiring loom -3-.
– To unlock turn the locking clip on the hose connections -7-
(black marking – front windscreen washer) and -6- (white
marking – rear windscreen washer) and disconnect the con‐
nections from the washer fluid pump. Collect the flowing out
washer fluid in a suitable vessel.
– Release washer hose for headlight -1- by pressing the locking
clip and detach.
– If necessary, push the washer fluid pumps out of the washer
fluid vessel upwards out of the rubber bracket.
– Remove front bumper ⇒ Body Work; Rep. gr. 63 .
– Remove front left headlight
⇒ "1.2 Removing and installing headlight", page 80
62
Rep. gr.92 - Windscreen wash/wipe system
.