Skoda Octavia III 2013 Workshop Manual page 186

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
1 - Screw cap
❑ screw in until there is an
audible click
❑ with securing suspen‐
ded to prevent any loss
at tank fuel filler flap
2 - Earth connection
❑ for fuel filler neck
❑ for discharging the elec‐
trostatic charge
⇒ page 181
3 - Screw
❑ replace
❑ 8 Nm
4 - Lock ring
❑ loosen and tighten up
with spanner -T30101
(3087)-
❑ 110 Nm
5 - Sealing ring
❑ replace
❑ install when dry
6 - Fuel delivery unit
❑ with integrated fuel filter,
the fuel filter cannot be
replaced individually
❑ with sender for fuel
gauge display - G-
❑ removing and installing
⇒ page 199
❑ sprawdzenie pompy
paliwa ⇒ page 203
❑ Fitting position ⇒ page 181
❑ Connect fuel lines
❑ Removing and installing fuel gauge sender - G-
7 - Fuel tank
❑ removing and installing
8 - Heat shield
❑ for fuel tank
9 - Circlip
10 - Tensioning strap
❑ Mark installation position before installation
❑ pay attention to correct position
11 - Screw
❑ replace
❑ 20 Nm + torque a further 90° (
12 - Fuel feed line
❑ to the engine
❑ pushed into the fuel tank
❑ do not kink
180
Rep. gr.20 - Fuel supply system
⇒ page 181
⇒ page 191
1
/ 4 turn)
⇒ page 202 .