Crankcase Ventilation; Crankcase Ventilation - Summary Of Components; Removing And Installing Oil Separator - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
3

Crankcase ventilation

⇒ "3.1 Crankcase ventilation - Summary of components",
page 140
⇒ "3.2 Removing and installing oil separator", page 140
3.1

Crankcase ventilation - Summary of components

1 - Screw
❑ replace
❑ 9 Nm
2 - Oil separator
❑ removing and installing
⇒ page 140
❑ replace if damaged
3 - O-ring
❑ replace
❑ oil before the assembly
4 - Inlet connections
❑ Check fitting position
5 - Hose
❑ for crankcase ventila‐
tion
3.2

Removing and installing oil separator

Special tools and workshop equipment required
♦ Sealant remover gasket stripper (bearing code GST, bearing
article no. R 34402), manufacturer Retech s.r.o.
♦ Cleaning and degreasing agent , e.g. -D 009 401 04-
♦ Protective goggles and gloves
♦ Silicone sealant ⇒ Electronic Catalogue of Original Parts"ET‐
KA"
Removing
– Removing the intake manifold
140
Rep. gr.17 - Lubrication
⇒ page 237 .