– Expose vacuum hose on the holder -3-.
– Unscrew screw -2-.
– Loosen clips -arrows- and remove toothed belt guard -1- up‐
wards.
– Unscrew screws -A...D- and push thermostat cover -1- to the
side.
– Expose wiring loom -arrows-.
– Unscrew screws -1- and -3- and remove toothed belt guard
-2- for coolant pump toothed belt.
– Unscrew screw -arrow- and remove screw cap -1-.
Position crankshaft to "TDC".
– Remove ignition coil with power output stage 1
– Remove ignition plug cylinder 1 with spark plug socket
wrench , e. g. -3122 B- .
Set the correct position of the crankshaft for screwing in the fixing
screw.
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
⇒ page 270
1.6/81 kW MPI engine - Edition 06.2014
.
103
2. Toothed belt drive