Skoda Octavia III 2013 Workshop Manual page 207

– Pull the fuel delivery unit -2- out of the opening of the fuel tank.
– Remove sealing ring -1- from fuel tank opening.
WARNING
Beware of fuel flowing out of the fuel pump that is still full -
accident hazard.
Put cleaning cloths underneath fuel delivery unit to collect fuel.
Note
You must empty the old fuel delivery unit before disposing of it if
you wish to replace it.
Install
Installation is carried out in the reverse order. Pay attention to the
following:
– Insert the new dry gasket ring for the flange into the opening
of the fuel tank and moisten only from the inside with fuel for
installing the closing flange.
– Insert the fuel delivery unit into the fuel tank in such a way that
the float arm of the sender for the fuel gauge display - G- is
not bent.
Caution
Risk of leakage.
The gasket ring must not get damaged when inserting the
closing flange.
• The lug -2- on the closing flange of the fuel delivery unit must
be positioned between tabs -3- and -4- and the marking must
face the opening -arrow- of the sealing ring on the fuel tank.
• Press down the closing flange of the fuel delivery unit down‐
wards against the spring force and bring it into the installation
position.
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
1. Fuel tank and fuel delivery unit
201