Skoda Octavia III 2013 Workshop Manual page 266

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
1 - Clamping sleeve
❑ before tightening, align
exhaust system free of
stress ⇒ page 267
❑ Fitting position and
tightening torque
⇒ page 261
❑ Tighten bolted connec‐
tions evenly
2 - Exhaust pipe with catalytic
converter
❑ do not twist decoupling
element more than 10° -
risk of damage
❑ Do not load decoupler
with tensile stress
❑ Do not damage wire
mesh on decoupling el‐
ement
❑ protect catalytic con‐
verter against shocks
and blows
❑ removing and installing
⇒ page 262
❑ Remove the protection
for the decoupling ele‐
ment on the spare part
as late as possible
❑ ustawienie układu wy‐
dechowego bez naprę‐
żeń ⇒ page 267
3 - Nuts
❑ Tightening torque and
tightening order
⇒ page 264
4 - Gasket
❑ replace
5 - Nuts
❑ Tightening torque and tightening order
6 - Screw
❑ Tightening torque and tightening order
7 - Support
❑ replace if damaged
8 - Support
❑ replace if damaged
9 - Support
❑ replace if damaged
10 - Screw
❑ 20 Nm
260
Rep. gr.26 - Exhaust system
⇒ page 264
⇒ page 264