Activated Charcoal Filter - Summary Of Components (Yeti); Removing And Installing Parts Of The Activated Charcoal Filter System - (Octavia Iii) - Skoda Octavia III 2013 Workshop Manual

4.2

Activated charcoal filter - Summary of components (Yeti)

1 - Activated charcoal filter
❑ Fitting location in right-
hand engine compart‐
ment
❑ if the catch peg is un‐
locked, the activated
charcoal filter can be re‐
moved from the holder
2 - Pressure holding valve with
connection hose
3 - Screw
❑ 8 Nm
4 - Vent line
❑ to fuel tank
❑ disconnect and connect
⇒ page 216
5 - Nut
❑ 8 Nm
6 - Support
❑ for activated charcoal fil‐
ter
7 - Electrical solenoid valve 1
for Activated charcoal filter sol‐
enoid valve - N80-
❑ Valve closed when igni‐
tion is switched off
❑ valve is actuated
(pulsed) by engine con‐
trol unit when engine is
warm
8 - Connecting hose
❑ To intake manifold
❑ check for firm seating
9 - Air admission fitting
4.3 Removing and installing parts of the ac‐
tivated charcoal filter system - (Octavia
III)
– Observe safety instructions
– Observe rules for cleanliness
– Remove rear wheel on the right ⇒ Axles, steering; Rep. gr.
44 .
– Remove the rear right wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
– Disconnect the vent lines -1- and -2- on the activated charcoal
filter ⇒ page 216 .
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
⇒ page 3 .
⇒ page 4 .
1.6/81 kW MPI engine - Edition 06.2014
4. Activated charcoal container system
227