Removing And Installing Engine Speed Sender G28 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
1.5 Removing and installing engine speed
sender - G28-
Special tools and workshop equipment required
♦ Socket insert 4 mm - T10370-
Removing
– Removing the intake manifold
– Release connector -1- and pull off.
– Undo screw -arrow- with socket insert - T10370- .
– Remove engine speed sender - G28- -1-.
Install
Caution
Carefully insert engine speed sender - G28- into the bore.
This prevents the engine speed sensor - G28- from falling be‐
tween the engine and gearbox.
Install in the reverse order of removal. When doing this, note the
following:
– Installing the intake manifold
Tightening torques
Screw for engine speed sender
⇒ "1.1 Ignition system - Summary of components", page 269
272
Rep. gr.28 - Ignition system
⇒ page 237 .
⇒ page 237 .