Intake Manifold; Intake Manifold - Summary Of Components - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
3

Intake manifold

⇒ "3.1 Intake manifold - Summary of components", page 236
⇒ "3.2 Removing and installing intake manifold", page 237
⇒ "3.3 Removing and installing the throttle valve control unit J338
", page 238
⇒ "3.4 Clean throttle valve control unit J338 ", page 239
3.1

Intake manifold - Summary of components

1 - Intake manifold
❑ removing and installing
⇒ page 237
2 - Sealing ring
❑ replace
3 - Sealing ring
❑ replace
4 - Intake manifold pressure
sender - G71- with intake air
temperature sender - G42- .
❑ removing and installing
⇒ page 248
❑ Repair solution when
the lug is damaged
⇒ page 248
5 - Screw
❑ 10 Nm
6 - Sealing ring
❑ replace
7 - Throttle valve module -
J338-
❑ czyszczenie
⇒ page 239
❑ removing and installing
⇒ page 238
❑ in case of replacement,
erase initialisation val‐
ues and adapt the en‐
gine control unit - J623-
⇒ Vehicle diagnostic
tester.
8 - Screw
❑ 7 Nm
9 - Screw
❑ 7 Nm
10 - Fuel rail with injectors
11 - Sealing ring
❑ replace
236
Rep. gr.24 - Mixture preparation - injection