Skoda Octavia III 2013 Workshop Manual page 140

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
– Apply sealant bead -arrow- onto the clean sealing surface of
the oil sump top part, as shown in the illustration.
• Thickness of sealant bead: 2 ... 3 mm.
Note
After applying the sealant, the oil sump top part must be installed
within 5 minutes.
– Check firm seating of the fit pin -2- in the cylinder block.
– Position the gasket -1- at the cylinder block.
– Position oil sump top part and tighten screws.
134
Rep. gr.17 - Lubrication