Removing And Installing Radiator Fan 2 V177 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
4.10 Removing and installing radiator fan 2 -
V177-
WARNING
There is risk of injury from radiator fans starting up automati‐
cally.
♦ Before carrying out work in the fan shroud area, discon‐
nect the electrical plug connections.
Removing
Note
All cable straps should be fastened again in the same place when
installing.
– Removing fan shroud
– Disconnect plug connection -arrow-.
– Unscrew screws -2- and radiator fan 2 - V177- .
Install
Install in the reverse order of removal. When doing this, note the
following:
– Install fan shroud ⇒ page 175
Tightening torques
♦ Fan screw
⇒ "4.4 Fan shroud with two radiator fans - Summary of com‐
ponents", page 171
178
Rep. gr.19 - Cooling
⇒ page 175 .
.