Skoda Octavia III 2013 Workshop Manual page 145

– Release screws -arrows- and remove engine oil cooler -1-.
Install
Install in the reverse order of removal. When doing this, note the
following:
– Insert new O-rings.
– Installing the intake manifold
– Top up coolant ⇒ page 150
Tightening torques
♦ Screw for engine oil cooler
⇒ "2.1 Engine oil cooler - Summary of components",
page 138
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
⇒ page 237 .
.
1.6/81 kW MPI engine - Edition 06.2014
139
2. Engine oil cooler