Skoda Octavia III 2013 Workshop Manual page 172

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
Removing
WARNING
Danger of scalding due to hot steam and hot coolant.
♦ When the engine is warm, the cooling system is under
overpressure.
♦ Reduce excess pressure by covering the cap of the cool‐
ant expansion tank with a cloth and opening it carefully.
– Open cap -arrow- for coolant expansion tank.
– Disconnect coolant hoses with hose clamps -MP7-602
(3094)- .
– Loosen hose clamps -arrows- and remove coolant hoses.
– Release fixing screws -1- and -3-.
– Remove coolant pipe -2-.
– Release fixing screws -1- and -2-.
– Remove coolant pipe -3-.
Install
Install in the reverse order of removal. When doing this, note the
following:
Note
Secure all hose connections with hose clamps which comply with
the series design ⇒ Electronic Catalogue of Original Parts"ET‐
KA." .
– Check coolant level ⇒ page 150
Tightening torques
♦ Coolant pipes at engine
⇒ "3.1 Cooling system attached to engine - Summary of com‐
ponents", page 165
166
Rep. gr.19 - Cooling
.