Skoda Octavia III 2013 Workshop Manual page 58

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
– Disconnect the hose coupling on the fuel feed line -1-
⇒ page 216 .
– Disconnect the hose coupling -2- to the activated charcoal fil‐
ter ⇒ page 216 .
Continued for all vehicles
– Loosen screw -1- but do not unscrew it.
– Release screw -2-.
– Swivel generator -3- forward in -direction of the arrow-.
– Release screws -arrows- at holder for pre-exhaust pipe.
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
50 .
– Remove caps of the screw connections of the front suspension
strut dome.
– Connect supporting device - T30099- as shown in the illustra‐
tion.
Note
On the Yeti, instead of base - T30119- use base - T30099/1- .
– Attach snap hook -MP9-200/10 (10-222A/10)- to the engine
suspension eyes.
– Slightly pre-tension engine/gearbox unit with the spindle, do
not raise.
– Remove engine mounts
52
Rep. gr.13 - Crankshaft group
⇒ page 37 .