Skoda Octavia III 2013 Workshop Manual page 60

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
♦ Extractor tool - T20143-
Work procedure
– Removing toothed belt
– Remove crankshaft toothed belt sprocket -1- in
-direction of arrow- from the crankshaft.
Caution
Risk of destruction of the engine.
♦ So as not to adjust the timing the crankshaft must not be
turned while the ribbed belt pulley is removed.
– Lift out sealing ring using the extractor hook -T20143/2-
-arrow-.
– Clean the contact and sealing surfaces.
Note
Do not oil new sealing ring.
– Push new sealing ring in -direction of the arrow- over the as‐
sembly sleeve - T10485/3- onto the assembly sleeve -
T10485/2- .
• Fitting position: Closed side of sealing ring points to the re‐
ceiver tube.
– Pull off assembly sleeve - T10485/3- in -direction of arrow-.
54
Rep. gr.13 - Crankshaft group
⇒ page 102 .