Skoda Octavia III 2013 Workshop Manual page 107

– Using the assembly tool - T10487- in -direction of arrow- press
on the toothed belt.
– At the same time, insert the camshaft clamp -T10477- up to
stop into the camshafts and fix with the screw.
If it is not possible to insert the camshaft clamp -T10477- , the
timing is NOK:
– Remove the toothed belt from the camshafts and repeat the
timings ⇒ page 96 .
If it is possible to insert the camshaft clamp -T10477- , the timing
is OK:
– Unscrew positioning screw - T10340- .
– Unscrew bolt -arrow- and remove camshaft clamp -T10477- .
– Pre-tighten screws -1- and -2- to the final tightening torque
⇒ page 87 , to do so use the counterholder - T10172A- with
adapters -T10172/1- and -T10172/2- .
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
101
2. Toothed belt drive