Skoda Octavia III 2013 Workshop Manual page 194

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
– Connect adapter - VAS 5565- to fuel delivery unit -1-.
– Connect remote control - V.A.G 1348/3A- to adapter -
VAS 5565- and to battery positive terminal in engine compart‐
ment.
– Connection -5- (yellow) from the adapter - VAS 5565- with
adapter cable -3- from the measuring tool set , e. g. -V.A.G
1594 C- , to the battery minus pole terminal.
Note
This step is only intended to ensure that the fuel pump runs when
the engine is switched off.
– Open tank flap unit -2-.
– Clean the area around the fuel filler neck.
– Unscrew the cap -1- for the fuel filler neck.
– Operate the remote control - V.A.G 1348/3A- and the shut-off
cock on the fuel extraction device - VAS 5190- until the fuel
tank is emptied.
Caution
The fuel pump must not run »dry«.
1.5.2 Emptying fuel tank when the fuel pump
is damaged when more than
(Octavia III)
Special tools and workshop equipment required
♦ Fuel extraction device , e. g. -VAS 5190-
Note
Safety precautions when working on the fuel supply system
♦
⇒ page 3 .
Rules of cleanliness when working on the fuel supply system
♦
⇒ page 4 .
188
Rep. gr.20 - Fuel supply system
/ 4 full -
3