Skoda Octavia III 2013 Workshop Manual page 167

– Remove thermostat with spanner - T10508- .
– Light press the wrench - T10508- down, while doing so, turn
in the -direction of the arrow-.
Install
– Insert thermostat. Fit the centring pin in into the
guide-arrow-.
– Install thermostat with spanner - T10508- .
– Light press the wrench - T10508- down, while doing so, turn
in the -direction of the arrow- as far as it can go.
Install in the reverse order of removal. When doing this, note the
following:
Note
Replace gasket.
– Moisten gasket with coolant.
– Top up coolant ⇒ page 148
Tightening torques
♦ Thermostat cover screws on thermostat housing
2.5.2 Removing and installing thermostat for
large coolant circuit
Removing
– Remove coolant pump
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
.
⇒ page 156 .
1.6/81 kW MPI engine - Edition 06.2014
⇒ page 153
2. Coolant pump, regulation of cooling system
161