Skoda Octavia III 2013 Workshop Manual page 271

– Remove rear tunnel bridge arrows ⇒ Body; Rep. gr. 66 .
– Loosen the clamping sleeve -arrow- and slide it forwards.
– Use body saw to separate exhaust pipe at right angles at the
separation point -arrow-.
WARNING
Risk of accident from silencer weight.
♦ A second mechanic is required for removing the silencer.
– Undo screws -2- and remove rear silencer -1-.
– Undo screw -3- and remove middle silencer -1-.
Install
Install in the reverse order of removal. When doing this, note the
following:
– Position clamping sleeve centrally to the side markers during
installation -arrows-.
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
1. Removing and installing exhaust system
265