Skoda Octavia III 2013 Workshop Manual page 170

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
– Separate plug connection -2-.
Note
Place a cloth below to absorb leaking coolant.
– Pull off holding clamp -3- and take coolant temperature sender
on radiator outlet - G83- out of connection piece.
Install
Install in the reverse order of removal. When doing this, note the
following:
Note
Renew O-ring.
♦
Insert new coolant temperature sender - G83- into the con‐
♦
nection piece immediately in order to avoid loss of coolant.
– Remove front noise insulation ⇒ Body Work; Rep. gr. 66 .
– Check coolant level ⇒ page 150
164
Rep. gr.19 - Cooling
.