Removing And Installing Coolant Regulator - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
– Set the toothed belt gear for the coolant pump drive onto the
camshaft so that the asymmetric grooves -1- and -2- in the
camshaft are positioned exactly in the middle of the recesses
-arrows- in the toothed belt gear.
• Grooves -1- and -2- in the camshaft are arranged asymmetri‐
cally.
• The recesses -arrows- in the toothed belt gear for the coolant
pump drive are also arranged symmetrically.
– Install coolant pump ⇒ page 156
Tightening torques
♦ Screw for belt pulley
⇒ "2.1 Summary of components - coolant pump/coolant ther‐
mostat", page 153
2.5 Removing and installing coolant regula‐
tor
⇒ "2.5.1 Removing and installing thermostat for small coolant cir‐
cuit", page 160
⇒ "2.5.2 Removing and installing thermostat for large coolant cir‐
cuit", page 161
2.5.1 Removing and installing thermostat for
small coolant circuit
Special tools and workshop equipment required
♦ Pliers for spring strap clamps
♦ Key - T10508-
Removing
– Drain coolant ⇒ page 148
– Loosen hose clamp -4- and remove coolant hose -3-.
– Undo screws -a- and remove cover -2- from thermostat hous‐
ing -1-.
160
Rep. gr.19 - Cooling
.
.