Tightening sequence thermostat housing at coolant pump - tight‐
ening torque and tightening sequence
Note
Self-cutting screws must be positioned by hand in such a way that
they find the old thread turn. Then tighten the screw to torque.
– Tighten screws in the sequence -A...F- to 8 Nm.
Tightening sequence cover for coolant thermostat at the coolant
thermostat housing - Tightening torque
Note
Self-cutting screws must be positioned by hand in such a way that
they find the old thread turn. Then tighten the screw to torque.
– Tighten cover screws -1- in the sequence -A...D- to 7 Nm.
2.2
Coolant temperature sender - Summary of components
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
2. Coolant pump, regulation of cooling system
155