Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
– Screw out screws -arrows- on engine mount by approximately
2 turns.
– Screw out screws -arrows- on gearbox mount by approxi‐
mately 2 turns.
– Position adapter T10497/2 on the housing fin of the cylinder
block, as shown in the illustration.
– Position engine mount T10497 with bolts T10497/1 at the cyl‐
inder block.
– Screw the adapter T10497/2 with screw -1- to the engine
mount T10497 and secure to 20 Nm.
– Fit the adapter - T10497/3- to the engine mount - T10497- and
tighten screw -1- to 20 Nm.
– Insert engine and gearbox jack - V.A.G 1383 A- to engine
mount T10497 and raise the engine/gearbox unit somewhat.
Note
Use double ladder , -VAS 5085- for example, to release the
screws for the assembly bracket.
24
Rep. gr.10 - Removing and installing engine