Skoda Octavia III 2013 Workshop Manual page 105

– Pre-tighten screws -1- and -2- to 50 Nm, to do so use the
counterholder - T10172A- with adapters -T10172/1- and -
T10172/2- .
– Unscrew positioning screw - T10340- .
– Unscrew bolt -arrow- and remove camshaft clamp -T10477- .
Checking valve timing
– Turn the crankshaft by 2 turns in direction of rotation of engine
on "TDC" for cylinder 1
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
⇒ page 93 .
1.6/81 kW MPI engine - Edition 06.2014
99
2. Toothed belt drive