Removing A Cd/Dvd Drive - IBM x3690 X5 Service Manual
Hide thumbs
Also See for x3690 X5:
- Installation and user manual (180 pages) ,
- Product manual (42 pages) ,
- At-a-glance manual (34 pages)
Table of Contents
Advertisement
Removing a CD/DVD drive
To remove a CD/DVD drive, complete the following steps:
1. Read the safety information and installation guidelines, see "Safety" on page vii
2. Turn off the server (see "Turning off the server" on page 17) and all attached
3. Remove the server cover (see "Removing the server top cover" on page 264).
4. Press and hold the release tab down as you push the drive from the rear to
5. Slide the drive-retention clip from the side of the drive. Save the clip to use
6. If you are instructed to return the CD/DVD drive, follow all packaging
290
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
and "Installation guidelines" on page 261.
peripheral devices. Disconnect all power cords; then, disconnect all external
cables as necessary to replace the device.
slide it out of the bay.
when you install the replacement drive.
instructions, and use any packaging materials for shipping that are supplied to
you.
Advertisement
Table of Contents
