IBM x3690 X5 Service Manual page 392

Hide thumbs Also See for x3690 X5:

Table of Contents

The following illustrations shows the cabling information for connecting the

8x2.5-inch drive backplane power/configuration cable and the SAS cables:

Note: Connect the combination power/configuration cable end to the power and

configuration connectors on the drive backplane. Connect the two power

connectors on the other end of the cable to the power backplane connectors on the

system board. The power connector on the end of the black cable (which might be

labelled 1/3) connects to backplane connectors 1 or 3 on the system board. The

power connector on the end of the gray cable (which might be labelled 2/4)

connects to backplane connectors 2 or 4 on the system board.

System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide