IBM x3690 X5 Service Manual page 324

Hide thumbs Also See for x3690 X5:

Table of Contents

10. Turn on the peripheral devices and the server.

System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide

6. Reconnect cables to the adapter. Be sure to route the signal cables through the

SAS cable guide and up and over the rear of the microprocessor air baffle;

then, through the loops on the scalability connector cover and then to the

adapter (see the following illustration). Use the cable ties (as shown in the

illustration) that come with the drive backplane to secure the SAS cables so

that they do not get in the way or get damaged.

Microprocessor

SAS signal cable

7. Replace the cover (see "Replacing the server top cover" on page 265).

8. Slide the server in the rack.

9. Reconnect the power cord and any cables that you removed.