IBM x3690 X5 Service Manual page 248

Table 11. IMM error messages detected when MAX5 is attached to the server (continued)
Event ID
806f050c-1881xxxx
806f040c-1881xxxx
230
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Message
Memory Logging Limit
reached for MEU DIMMs on
subsystem System Memory
MEU DIMMs disabled on
subsystem System Memory
Severity Description
Error The memory logging
limit has been
reached.
Info MAX5 memory
expansion module
memory DIMMs n
has been disabled.
Action
1. Check IBM
support site for
an applicable
RETAIN tip or
firmware update
that applies to
this memory
error.
2. At the next
maintenance
opportunity,
swap the affected
DIMM (as
indicated by the
light path LED or
event log entry)
to a different
memory channel.
See "Replacing a
memory module"
on page 296 for
information on
DIMM
population
sequence.
3. If the PFA
re-occurs (on the
same DIMM),
replace the
affected DIMM as
indicated by the
light path LED or
event log entry
(check for
previous history
of PFA).
4. If the problem
remains with the
same DIMM
connector, inspect
the DIMM
connector for
debris or damage.
If the DIMM
connector is
damaged, (train
technician only)
replace the MAX5
system board
tray.
No action;
information only.