IBM x3690 X5 Service Manual page 297

b. Grasp the handle and pull the drive out of the drive bay.
c. Skip to step 4.
3. Removing a 1.8-inch hot-swap drive:
a. Remove the filler panel.
b. Grasp the orange release latch on drive tray handle of the drive tray for the
drive that you want to remove and slide the release latch down to unlock
the drive-tray handle; then, rotate the drive tray handle down and the pull
the handle toward you to slide the drive out of the bay. Lift the drive out of
the drive tray.
4. If you are instructed to return the drive assembly, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Release
latch
Drive tray
handle
Chapter 5. Removing and replacing components
1.8-inch
filler panel
279