Replacing The Memory Tray - IBM x3690 X5 Service Manual
Hide thumbs
Also See for x3690 X5:
- Installation and user manual (180 pages) ,
- Product manual (42 pages) ,
- At-a-glance manual (34 pages)
Table of Contents
Advertisement
Memory tray
handle
6. Lift the memory tray from the server and set it on a flat surface to avoid
damaging the connector pins on the bottom of the tray.
7. If you are replacing the memory tray, remove the DIMMs (see "Removing a
memory module" on page 295).
8. If you are instructed to return the memory tray, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Replacing the memory tray
To install the memory tray, complete the following steps:
1. Read the safety information that begins on page "Safety" on page vii and
"Installation guidelines" on page 261.
2. Reinstall the DIMMs (see "Replacing a memory module" on page 296).
3. Align the tabs on the sides of the memory tray with the slots on the power
supply cage and the chassis wall and lower the memory tray into the server.
Note: Before you install the new memory tray, make sure that there are no
packaging material underneath memory tray.
RAID
battery
trays
Chapter 5. Removing and replacing components
267
Advertisement
Table of Contents
