IBM x3690 X5 Service Manual page 291

Hide thumbs Also See for x3690 X5:

Table of Contents

c. Reinstall any SAS cables that you removed earlier back into the SAS cable

guide. Be sure to route the signal cables through the SAS cable guide and

up and over the rear of the microprocessor air baffle; then, through the

loops on the scalability connector cover and then to the adapter (see the

following illustration). Use the cable ties (as shown in the illustration) that

come with the drive backplane to secure the SAS cables so that they do not

get in the way or get damaged.

Microprocessor

3. Reinstall the fan cage assembly (see "Replacing the fan cage assembly" on page

4. Reinstall the cover (see "Replacing the server top cover" on page 265).

5. Slide the server into the rack.

6. Reconnect the power cords and any cables that you removed.

SAS signal cable

Chapter 5. Removing and replacing components