Removing A Max5 Hot-Swap Fan - IBM x3690 X5 Service Manual

Hide thumbs Also See for x3690 X5:

Table of Contents

7. Reinstall the bezel (see "Replacing the MAX5 bezel" on page 376).

8. Reconnect the power cords to the MAX5; then, connect all external cables to the

9. Turn on the peripheral devices and the host server.

Removing a MAX5 hot-swap fan

To remove a hot-swap fan from the MAX5 memory expansion module, complete

the following steps:

1. Read the safety information and installation guidelines, see "Safety" on page vii

and "Installation guidelines" on page 261.

2. Remove the bezel (see "Removing the MAX5 bezel" on page 376).

3. Squeeze both fan latches on the fan toward each other and slide the fan out of

4. If you are instructed to return the fan, follow all packaging instructions, and

use any packaging materials for shipping that are supplied to you.

Release latch

Chapter 5. Removing and replacing components

Release latch