IBM x3690 X5 Service Manual page 352
Hide thumbs
Also See for x3690 X5:
- Installation and user manual (180 pages) ,
- Product manual (42 pages) ,
- At-a-glance manual (34 pages)
Table of Contents
Advertisement
1. Read the safety information and installation guidelines, see "Safety" on page vii
2. Turn off the server (see "Turning off the server" on page 17) and all attached
3. Remove the top cover (see "Removing the server top cover" on page 264).
4. Disconnect the cables from the adapters in the PCI riser-card assembly in slot 1
5. Remove the system-board battery:
6. Dispose of the battery as required by local ordinances or regulations. See the
334
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
and "Installation guidelines" on page 261.
peripheral devices. Disconnect all power cords; then, disconnect all external
cables as necessary to replace the device.
and remove the PCI riser assembly from the server. (see "Removing a PCI
riser-card assembly" on page 336).
a. Use one finger to push the battery horizontally out of its housing.
b. Use your thumb and index finger to lift the battery from the socket.
IBM Environmental Notices and User's Guide on the IBM Documentation CD for
more information.
Advertisement
Table of Contents
